Journey Pillbox
Description
Pillbox which can be configured to the length you need for a journey. I had the problem of making trips a few days longer than a week so that standard pillboxes were too small. So I designed and printed this one. The compartments can be connected with bayonet couplings to make a pillbox for as many days as you need. A special top and bottom compartment can be used to form a lid for the top compartment and a cap for the bayonet coupling of the bottom compartment. I printed it with clear PETg hoping that will be the best for storing pills for a couple of weeks. Also PETg is quite good when it comes to being a bit springy without breaking. I thin PLA maybe not sufficient because of this. But prove me wrong an post your makes here. I tried to use a clearance of 0.3mm in my design. So make sure your printer is set up to be significantly more exact than this to get a working product. Print as many of the GrundkoerperXX (basic element XX= abbreviation of the day in German) elements as you need one for each day a journey might take. Additionally print one Deckel (the lid) and one Fuss (the bottom bayonet cap)
Statistics
Likes
0
Downloads
0