ESP-32 S3 Dual USB-C Case
Description
Here is a case for the ESP32 S3 Dev Board with 44 pins. The case can accommodate two USB-C cables simultaneously. It fits tightly, so removing the ESP board it might be challenging. It is designed to accommodate female DuPont cables at the back of the board. The connector tips remain exposed outside the case, so be careful not to place the board on a surface that could cause a short circuit. The BOOT and RESET buttons function properly, but you need to select "Print Thin Walls" in CURA. Even then, you'll need to separate the buttons with a thin knife. Link to the Board: https://es.aliexpress.com/item/1005006418608267.html?spm=a2g0o.order_list.order_list_main.143.504e194d2tMYyV&gatewayAdapt=glo2esp
Statistics
Likes
0
Downloads
0