Cat Bowl Riser
Description
Here is a riser I modeled for a couple cat bowls I have. Raises the bowl about 3 inches from the ground and holds it at a 15 degree angle to ensure the cat does not have to bend down to eat or drink. Modeled to fit a bowl with a 115 mm radius "foot". Dimensions: Front Leg Height: 75mm (~2.95 in) Back Leg Height: 120mm (~4.72 in) Riser Width: 140mm (~5.5 in) Print amount with PLA at 30% infill without supports: 132g
Statistics
Likes
0
Downloads
0