GEEETech MK8 Printhead Fan Shroud ver.3 (compact)

Description

A Revised Version Of My Geeetech Prusa I3 Acrylic Print Cooler Duct That Mounts To The Mk8 Extruder - My Mk8 Extruder Came With A Cooling Block That Had The Heat Sink Fins Running In A Vertical Direction - But I Have Had Several Requests To Make A Version For The Heat Sink With Horizontal Fins - This Version #2, Will Work Well With The Fins In Either Direction - Directing The Air From The Heatsink Fan To The Blower Ducts And Using It As A Print/Filament Cooler. This Keeps The System Very Compact And Light. *Update (9/19/2015): Added Updated Version That Has The Led Mounting Holes If You Want Led'S On Your Cooler (Illuminates The Print) Like My Ver 2.0 But Now For A Vertical Or Horizontal Heatsink. The Led'S X4 Direct Light Around The Nozzle So I Don'T Need To Find A Flashlight Every Time I Want To See How My Print Is Doing Or To Inspect/Clean My Nozzle. Led'S I Used Are: Bcmd204Uwc (3200Mcd, 3Mm, 3.2Vf @20Ma - 25Viewing Angle) Actual Measurements Are 3.1Mm Diam With A 3.8Mm Diam Lip At The Very Top X 6.3Mm In Length, 3.3V, Set In The Mounts With Silicone Or Epoxy At The Top Of Each Bulb, Hooked Up In Series Then Directly To The 12V Power Supply With A Separate On/Off Switch (See My Other Things For The Switch Box) - Please Post Pics Of Your Makes Of This Item And Comment If You Have Ideas To Make It Better - Thanks All !!!

Statistics

Category

Tags