Alarm Clock Case
Description
I wanted to build an Stereo MP3 Alarm Clock that also can be used as BT A2DP Speaker. That´s what i created the case for. Feel free to use it for other or similar projects. <b>Screws needed for assembling</b> 10x 2.6x8mm? Self Tapping (TM1637+Speakers+SD-Mount) 2x 2x6mm Self Tapping (SD-Card Reader) 2x m2x18mm Screws + Nut (ButtonBar) <b>Electronic used</b> 2x Max98357 I2S 2x AIYIMA 1.5 Inch Portable Speakers 4 Ohm 5W 40MM 1x TM1637 1x Mini SD Card Reader 3x Push Buttons 12x12x7,3MM with Caps 1x Small 10x15mm Power Switch 1x USB-C Connector Type-C 1x Double Side 5x7 Prototype Board 4x Adhesive Rubber Feet And as always some ESP32 (MH-ET), JST-XT Plugs and Cables. I made two front plates that are slightly different. Both are for 40mm Speakers but i had two speaker types with different screw hole distances (~47mm and ~50mm)...
Statistics
Likes
0
Downloads
0