Parkside X 20V to Bosch 14.4V adapter
Description
A converter that allows mounting a Parkside X20V team battery to Bosch 14.4V power tools. In the design, I tried to retain as many elements from the original battery as possible. I do not know if components from other manufacturers' replacements will fit. You will be able to use the following original parts: The top cover (with the Bosch connector) Bosch connector 4 Torx screws, 2 of which need to be shortened by about 3mm - measure it yourself 2 release buttons Additionally, you will need: 2 pen springs (diameter about 5mm) 2 wires, 10cm in length, with a cross-section of at least 2.5mm² 2 male 6.3mm connectors used in automotive applications Remember, after disassembling the original battery and removing the connector, do not forget to properly dispose of the original cells!
Statistics
Likes
0
Downloads
0