Bosch Grass Trimmer Plate (Durablade replacement)
Description
If your upset by the Durablade system, here's a replacement plate that will allow you to use standard wire on your Bosch grass trimmer You only have to remove the stock Durablade plate and install your freshly printed plate on the 10x10mm harbour of the machine (snug fit if printed accuratly) You will need a 20mm washer and a 4mm screw (15/20mm long) You can use 1 or 2 lenghts of wire in order to get 2 or 4 cutting lines If you use 2 wires, don't cross them put put them at 90° angle as shown on the picture You can fit wire up to 5mm in diameter The shape of the plate is designed to prevent wire breaks Printing tips: at least 3 walls, 5 bottom and top layers, 20% gyroid infill. it's better to use PETG or ABS (PLA won't last as long due to moisture)
Statistics
Likes
0
Downloads
0