Calathea wall mounted tray + flower pot with thread
Description
I made wall-mounted flower pots for my calathea plants collection. The wall-mounted bowl is bigger with enough space for clay/lava or rocks of your choice, to keep enough water for evaporation. It helps to maintain higher humidity for these rainforest plants. In the middle is a thread to keep the flower pot in place and above water level. Don´t forget to put on the bottom of the flower pot some cloth and stones for the drainage layer. I highly recommend painting the bowl's inner part with some transparent acryl spray or spray sealant to provide 100% water tightness. Wall mount is made from PCTG. With classic supports for thread and holes. ABS/ASA should be a better option. PETG would be good enough too. Holes for two 3,5 mm embed screws, upper allows leveling. Print settings: Wall mount: - Material: PCTG - Rosa Glitter brillant silver - Walls: 3, top/bottom: 5 - Infill: 15% honeycomb - Supports: Yes, classic for thread and holes - Post-printing: spray sealant for an inner bowl Flower pot: - Material: PLA - Creality black and Rosa magic silk storm shadow - Walls: 3, top/bottom: 5 - Infill: 15% honeycomb - Supports: No - Post-printing: nothing
Statistics
Likes
0
Downloads
0