Military Tent Pole Guy-Wire Cap
Description
This is an end cap for a military surplus tent pole that is designed to be used as a guy wire anchor point when using these tent poles as antenna masts for amateur radio. The cap has three guy wire anchor points 120° apart as well as a 1/4 inch hole which can be used to thread wire through to hold something such as a G5RV or tapped so a threaded bolt can be put through for other antenna wire assemblies such as an inverted V or L style antenna. If you intend to put a threaded bolt through, please use a nylon bolt or print your own out of a non-conductive material. The entire assembly is designed to be non-conductive, so it does not affect any antenna installations. It is strongly recommended that you print this with a weather resistant and UV resistant polymer such as AMA. Supports are not needed.
Statistics
Likes
0
Downloads
1