NoName X-carrier for Yavoth or DragonBurner tool head and Orbiter v2 rest
Description
As I own some Vorons and looked for better tool heads there I discovered Chirpys DragonBurner and the new Yavoth designs: - https://github.com/chirpy2605/voron/tree/main/V0/Dragon_Burner - https://github.com/chirpy2605/voron/tree/main/V0/Yavoth Both tool heads fit to the Voron v0.2 or Micron+ X mounts so I redesigned the NoName X carrier to offer the same mounting points. Those smaller tool heads allow the usage of the whole bed (at least my 255x255 mm version) especially now with better Y axis range. The X-carrier requires 4 threaded heat inserts: - two on the bottom for the lower mounts - two in the upper front to hold M3x35 from the back through the top part. If using an 8 mm inductive probe you want to fix it with an M2.5/M3 grub screw in the respective hole. Happy printing!
Statistics
Likes
0
Downloads
0