petSD+ Case
Description
This is a 3D printable case for the petSD+ that resembles the Commodore 8050 disk drive. It consists of a base, top, back and 3 switches. The LEDs on the petSD+ should be replaced with the ones listed bellow (or similar), and light pipes used for better visibility of the lights. No glue is necessary to assemble. You will also need 4 screws to attach the petSD+ PCB to the base of the case. Here are the assembly instructions I provide when selling the kit: https://drive.google.com/file/d/1H0cVFVp0PuOAxga5Zh5Lntj_Px1mk4bz/view Red LED: https://www.mouser.com/ProductDetail/Kingbright/WP934EW-ID?qs=58z0TXQGVSREwhtC362Hmw%3D%3D Green LED: https://www.mouser.com/ProductDetail/Kingbright/WP934EW-GD?qs=58z0TXQGVSTZ3lOkUk8wEA%3D%3D Yellow LED: https://www.mouser.com/ProductDetail/Kingbright/WP934EW-YD?qs=58z0TXQGVSTXPMH%252BlghI5A%3D%3D Light Pipe: https://www.mouser.com/ProductDetail/Dialight/515-1301-0125F?qs=rkevp0fsrtukVNX7mAM1Mg%3D%3D I also used the following rubber feet: https://www.mouser.com/ProductDetail/Hammond-Manufacturing/1421T2?qs=KLj0QfLrw0FktA8nGBgQLA%3D%3D
Statistics
Likes
0
Downloads
0