Raspberry Pi 5, NVMe, SSD, Pimoroni
Description
This design is for the Raspberry Pi 5 with active cooling and the PCIe M.2 Hat Pi 5 NVMe SSD PIP PCIe Pimoroni. This design is shorter than the original, has a M4 threaded top, and built-in standoffs for the Raspbery Pi. Use 2.5mm x 10 screws for the bottom built-in standoffs and four M4 x 20 mm screws to attach the upper case to the lower case. I used a 1 TB NVMe SSD, but a smaller SSD would work as well. Use 100% infill for the TPU feet.
Statistics
Likes
0
Downloads
0