Parametric Flashlight Lens Cover
Description
This is a parametric lens cover design for flashlights. It is intended for use with flexible Filament ONLY, though you can probably get a satisfactory result when using stiff filament when you play around with the parameters enough... There are ready to print files for the flashlight models : - Fenix E35R - Fenix E12 V2 Of course there is also the parametric Fusion360 file so you can customize the model to fit the specific flashlight you have. It should be noted, however, that I have only tested this model with flashlights that have purely cylindrical heads. If the head tapers somehow it may not fit properly and you will have to change the design a bit..it would probably work to just copy the sketch and paste it on an offset plane above the first sketch (the height of the offset plane should be the height of the cover), then change the dimensions of the top sketch to fit the taper and loft the two sketches) Looking foward to any makes you want to share!
Statistics
Likes
0
Downloads
1