Problem Solver Agitating Case Feeder for Wombatordnance feeder
Description
My "Simpler Case Feeder" along with the original Wombatordnance Drum had a major problem with cases "bridging" around the drum and not feeding any cases. Agitation of the hopper actually made it worse packing them together. This is a modified version of the "Simpler" system by making it more complicated :P I added 3X magnetically repelled (different 6mmx10mm magnets) agitators to the drum (retained by 2x M4 x 20mm socket head screws per agitator) that solved the problem. I only used 1 pair of magnets per agitator and the system has feed a full hopper of 223, 243 Win, and 300 Win Mag without issue. Copy Paste from other Remix: Wanted a more secure connection to the motor and simpler re-configure for case size. Hex holes are sized for 6mmx3mm magnets. I only used 1 pair of magnets per "Pocket Filler" and they seem to hold very well. There are 3 pockets per slot so you can make the volume fillers really secure if needed. Set screw holes are for M4 set screws and threaded in the model. I did not need to chase the threads with a tap on my Bambu X1C with a 0.6mm nozzle (0.12 layer height in that area).
Statistics
Likes
0
Downloads
0