Garmin phone mount

Description

# Assembly Instructions 📱🚲 This Garmin GPS mount is designed to attach securely to your phone case, ensuring your GPS device is always within reach during your adventures. The design includes a square cut template and adjustable parameters to ensure a perfect fit. Here's how to assemble it: ## Step-by-Step Guide: 1. Print the Cutting Template: - File: cuttingTemplate.stl - Recommendation: Use a small layer height, such as 0.12mm. No supports are necessary. *** Note: The layer height should match across all files. Refer to parameters.png to ensure consistency. *** 1. Cutting the Phone Case: - Carefully cut a square hole in your phone case using the cutting template. *** Tip: Try to make tight tolerances. You can always file the edges to make it larger.*** 1. Adjusting Parameters (If Needed): - If the cut is too large, don't worry! You can adjust the parameters in the `garminPhoneMount.f3d` file to ensure a snug fit. - Open the file in Fusion 360 and modify the dimensions in the parameters tab as needed. 1. Print the Garmin Mount: - File: `garminPhoneMount.stl` - Ensure the layer height its 0.12mm _or change it at matches the `garminPhoneMount.f3d` parameters_, as the base will need exactly 2 layers for proper strength. - No supports are needed; the design is optimized for easy printing. 1. Assemble the Mount: - Insert the Garmin GPS mount into the square hole on the phone case. Ensure it's a snug fit. - If necessary, file down any uneven edges to perfect the fit. ** If you don't need every day the garmin mount, you can print the `holeCover.stl` to make a normal phone case again **

Statistics

Category

Tags