Eyepiece for Asaklitt 34-3589 binoculars
Description
Plastic base of the eyepiece for some binoculars (designed for Asaklitt model 34-3589; I suspect this might be a Clas Ohlson store brand and thus the same design might exist under other names). I tried to reproduce it as close as possible, including stops along the spiral guidelines, but it seems it was wrong to assume that the spirals start at 120-degree intervals. Still, with a little bit of filing it works well enough. To install, unscrew the flathead screws that will travel along the spiral paths. Iirc only 2 of them actually unscrew. Pop the frame on, screw the screws back in and check that the frame travels correctly (remove and file/sand as needed). Put both eyepieces at maximum or minimum level, apply glue to the frame and align the rubber cover with its unbroken counterpart.
Statistics
Likes
0
Downloads
0