Theater Seat Tray Bracket
Description
I designed this bracket to attach to the Valencia Syracuse theater chair accessory port. I found this design best to be printed at 100% infill. I printed with supports touching the build plate. I did not print supports underneath the cone shape. I printed upside down. The 3.5 long bolt may not be required. But I like bulking up the stiffness with something reliable. Pilot holes in the cutting board good. I cut the 12 x 18 cutting board in half to create two. You may need to scale up and down to meet your printers behavior. For me I printed 7 interfaces to get the fit just right. If you make it I`d love to see it! -Needed 1x 5/16 in.-18 x 3-1/2 in. Zinc Plated Hex Bolt https://www.homedepot.com/p/Everbilt-5-16-in-18-x-3-1-2-in-Zinc-Plated-Hex-Bolt-800766/204645551?source=shoppingads&locale=en-US&pla&gad_source=1&gclid=CjwKCAjwmrqzBhAoEiwAXVpgolx90n_n26_KIv6pTkOIpo8_E94H37bOFIf3mh3MCcrOZVBOdEjmlRoCaBcQAvD_BwE&gclsrc=aw.ds 5X #7 x 3/4 in Philips Flat Head Zinc Wood Screw https://www.homedepot.com/p/Everbilt-7-x-3-4-in-Phillips-Flat-Head-Zinc-Plated-Wood-Screw-6-Pack-807131/204587399 1X Cutting Board Approximately 9 in x 12 in x 0.32 in (thickness) https://www.amazon.com/dp/B0BG34QZ28?ref=ppx_yo2ov_dt_b_product_details&th=1
Statistics
Likes
0
Downloads
0