Laser Cut Robot Kit - based off Pee Wee Rover
Description
Based Off The Pee Wee Rover Kit, I Designed A Similar Kit (The Sizing Is A Bit Different) With Servo Mounts, Should You Decide You Want To Add More Functionality Then Just A Robot That Drives Around. I Got The Idea After We Gave Peewee Kits Out At The Heatsync Labs Nodebots Day Event! Using The Johnny-Five Plugin For Octoblu You Can Build One That Connects To The Web Easily Using A Standard Arduino. Just Like This Https://Vine.Co/V/Ex9J2Qpizjh Look For A Tutorial On Hackster.Io/Octoblu To Come Soon On How To Connect This To The Web. Https://Www.Youtube.Com/Watch?V=Dnmjujawo00 You'Ll Need: - Motors : Http://Www.Amazon.Com/Diymall-Dc3-6V-Uniaxial-Magnetic-Gearbox/Dp/B012Fymw54/Ref=Sr_1_17?Ie=Utf8&Qid=1441147167&Sr=8-17-Spons&Keywords=Geared+Plastic+Motors+With+Wheel - Arduino Uno Style Board That Support Firmata Firmware - Polulu Motor Driver Https://Www.Pololu.Com/Product/2511 - Battery Pack Then Do This... 1 - Octoblu: App.Octoblu.Com 2 - Install Firmata To Your Arduino And Plug It Into The Computer Running Your Gateblu 4 - Install Johnny-Five Plugin From App.Octoblu.Com 5 - Configure Your Board From The Device Details Page. 6 - Build A Flow To Control It.
Statistics
Likes
22
Downloads
0