Ghost Stories Insert (with White Moon Extension), easier to print, less time and filament use
Description
I am not sure if this is a remix. The design was done from scratch in Fusion 360 (file attached). All the measurements were taken from the brilliant design of LittleForest. I just found that i won't need that much structure filled with infill. If you want to, you can beef the walls up. Currently i got it at 1.6 mm (4 walls with a 0.4 nozzle). This should be more than strong enough and saves on print time as well was on filament. You should need around 620 grams (instead of ~930 grams) of filament and with a current gen printer around 12 hours of print time. Based on the baseline ender 3 profile with 0.24 mm layer lines this will take around 47 hours (instead of 65 - this is an improvement - right? (: ). Here is again the useful description of LittleForest for these models: More pictures below. I wanted a 3D printed insert of Ghost Stories, but I couldn't find anything I liked so I made my own. Its my first creation. It is specifically designed for sleeved cards. I use the Fantasy Flight sleeves which are known to be a little long, so your sleeves will fit for sure. There is no lid lift with the player boards and the rules so you don't have to worry about that either. Please print Token Tray three times. Its approx. 600-700g of filament so be sure you have a fresh roll or keep track of your usage. Each piece is between 5h30-10h to print, so overall this was somewhere around 65 hours total. Your mileage may vary. If you have any questions let me know, I'm happy to help. (Some design inspiration from dhasday and their Deception: Murder In Hong Kong insert, but all STL's are my own.)
Statistics
Likes
0
Downloads
0