iFlight Nazgul GPS antenna mount bottom plate
Description
Remix for attachment to the bottom plate This is a GPS/Crossfire mount for the iFlight Nazgul Evoque FPV drone bottom plate. It replaces the stock TBS crossfire immortal T antenna mount and uses the frame spacers imbedded in said antenna mount. This is an early work in progress that I have printed and fitted onto my Evoque. I'll update this as I test and adjust the fitment. -Ender 3 pro with a microswiss direct drive extruder -.4mm nozzle -Ninjaflex TPU @ 235c, 55c bed, 100% cooling@ layer 2, 18mm/s print speed, 1mm retraction @ 20mm/s -prints fine with no supports 12/26/21 Update: I've been using the first one I printed to this day and don't see a need to change anything. I've taken my Evoque out to 2miles, smashed it against a few fences and the ground pretty hard, and the print just takes the use and abouse with no issues. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: only unter the flying end parts where the rods go in Resolution: .12 Infill: 20-50% Filament brand: NinjaFlex Filament color: any Filament material: TPU
Statistics
Likes
0
Downloads
0