Case for 150W electronic load | elektronische Last Gehäuse
Description
This is a case for the 150W electronic load (the one with 4 buttons). Additional Parts: - 4x M3x8mm countersunk screw - 4x M3x16 socket head screw Printing: All parts need supports for perfect results. - body: 0,3mm - top: upside down; 0.2mm - buttons: marking has to be up; 0,12mm with brim - button support: 0,12mm with brim Hold the buttons in place with the help of pliers. Then fasten the screws from the other side.
Statistics
Likes
0
Downloads
0