Chicken waterer
Description
This is a 2 part water dispenser for my chickens! I never uploaded the first model, but after testing it for a year, I now needed one with larger capacity. So, I updated the design and made it bigger. The water tray fills automatically, and should stop about 8mm (about 1/3 inch) below the rim of the tray. This must be printed solid, unless you plan on sealing it in post processing. Required printable size: 305x305x280 (Long, Wide, High) This is intended for use outside, so use appropriate material for sun exposure! I chose PETG, and I printed the dispenser solid. This container should hold around 2 gallons (about 7.66 liters).
Statistics
Likes
0
Downloads
0