Vesa Universal Desk Stand Screwless
Description
Screwless vesa desk stand for monitor 100x100mm (can be remixed for bigger) ****** Print at your own risk ****** I used 5 lines of wall with 15¨% infill PLA. Depend on direction of your print you must use suports or rafts. In the midle, I used a 28.5 mm coat rack alluminiun tube (found in any home depot). Can be remixed for bigger tubes. Caution: The longer the tube, the larger the base must be The model I made available, I used a 38cm tube.
Statistics
Likes
0
Downloads
0