Adapter for Microprobe - Sprite extruder
Description
I needed an adapter for Biqu Microprobe to use it with Creality Sprite extruder. After a two iteration I came with this one. I wanted to put the probe as close as possible to the hotend. First I made one that was axial under the CRTouch probe support, but the the distance on X axis was 41mm. This is why I shifter the Microprobe support closer to the carriage by 15mm. Changes: - Cut that form the plastic case a corner with dimension 19mmx9mm. - The wire from the extruder motor needs to be unplugged from PCB and passes through the closed space that holds together the two planes. - The screw holes for Microprobe can be used to screw the holder to the CRTouch plate. In Marlin, Configuration.h, I used the following parameters: <p>#define NOZZLE_TO_PROBE_OFFSET { -29, -27, -1 }</p>
Statistics
Likes
0
Downloads
0