Kobo Touch BlueFly v22 case
Description
A case for using the Kobo Touch e-reader with a BlueFly TTL v22 vario as flight instrument. You will need two M4 screws to hold the lid, better if you find some rounded head ones. Attach the vario board and the sepaker to the bottom of the case with some two-sided adhesive tape. Remove the back cover of the Kobo and fit it under the ledge on the straight side of the case, then hold it down with the other ledge on the lid. You can use some thin neoprene or mousse stripes (the one for window insulating is ok here, but not for the vario) to hold it better in place and avoid vibrations (see picture). Optionally there is room for an extra battery under the Kobo, secure it to the bottom with double-sided tape. The two holes on the side are to be used for a lanyard, tie the knot inside the case for best results. Links: [Kobo Touch](https://en.wikipedia.org/wiki/Kobo_Touch) [BlueFly TTL GPS v22](https://www.blueflyvario.com/product/blueflyvario_ttl_gps_v22/)
Statistics
Likes
0
Downloads
0