MicroSD and SD Card Pocket Case (2 MicroSD & 1 SD)
Description
Pocket Case for SD card and 2 MicroSD cards. Print both with the pocket side up. I used a brim for adhesion and supports for the counter bored screw hole. I also used 5 wall loops and 5 top and bottom layers with 25% infill. That's probably excessive though. You will need either a 4-40 x .250" long button head screw or an M3 x 6mm button head screw to assemble. I tapped the hole in the SD-Bottom piece and used a 4-40 screw to assemble but an M3 will work the same way. I also put a drop of super glue in the last thread or two of the hole and used that to lock the screw in permanently. If you found this design useful and feel inclined to contribute any amount, it would be greatly appreciated! https://paypal.me/WTFRacing?country.x=US&locale.x=en_US
Statistics
Likes
0
Downloads
0