Shelly Pro 4 and Shelly Pro 3 Enclosure
Description
Enclosure for the Shelly Pro 4PM. A cable for power supply and 4 cable outputs for the devices which are to be switched and the power is to be monitored. I used standard extension cables, cut off and led it into the housing. Then I used 2 5 WAGO terminals, cable binders and core sleeves for the phases. The holes for the cables have a diameter of 7mm. Also I use a short and slim Ethernet Patch Cable and a Delock Modul D-Typ RJ45 Cat.6, This Module you will find sure with a different brand name. In addition, it also needs 2 short M3 screws to attach the RJ-45 socket. Following links to the products, they are from a Swiss webshop, but use Google, you will find them elsewhere. Affiliate links will follow. Shelly Pro 4PM LAN und WiFi-DIN-Rail Switch https://www.shelly.com/de-ch/products/product-overview/shelly-pro-4pm-1 Shelly Pro 3 LAN und WiFi-DIN-Rail Switch https://www.shelly.com/de-ch/products/product-overview/shelly-pro-3-1 Delock Modul D-Typ RJ45 Cat.6 Buchse zu Buchse https://www.delock.de/produkt/86782/merkmale.html Very important: And be very careful during the montage. Be careful not to harm cables, use cable tie and compare the cable route with the example photo. This Housing is not certified or officially tested. The assembly should be carried out by an electrician. I expressly reject any responsibility! If you would like to use or reproduce this electric housing commercially, please contact me to conclude a license agreement. This can be used free of charge for private use. But I'm very looking forward to your donation: http://Ko-fi.com/beathoch or: https://www.paypal.com/donate/?business=ABYSDSCV8PD4W&no_recurring=0¤cy_code=CHF Only thanks to your donation can other interesting things arise. Thank you very much! 3D PRINTING SETTINGS Use a suitable filament for an electric housing. I use ABS or ASA for my housing.
Statistics
Likes
0
Downloads
0