White noise whistle (similar to death whistle)
Description
This is a white noise whistle! It's much similar to death whistles, but specifically done so it doesn't do loud screeching, just white noise. It's louder than just blowing in air, but not loud enough to scare people, unless if you blow like elephant! It works well now, but I'll do updates and improvements, as well you can give suggestions, and modify it. Printing: Generally you can print the normal-fixed.stl with arbitrary scale between 50-200%, but there are other versions too for bigger/smaller to have same size of mouthpiece. On the assembly, I have printed these versions in order of size: 0.6666 v5.stl 100% scale (i.e. it's 66.6% of original size) normal-old.stl with 100% scale normal-old.stl with 133.33% scale normal-fixed.stl with 200% scale And printed the 3 connectors, respectively for 0.66 to 1.0, 1.0 to 1.33, 1.33 to 2.0 Glued them with dichloromethane, any glue is ok, without glue it holds but sometimes moves out of place, so when you're happy with the "configuration" you can glue it. Here's a demonstration: https://www.youtube.com/watch?v=8zzNpFl5Pe0
Statistics
Likes
0
Downloads
0