Amiga 1200 MultiTools for the Modulator Space
Description
Steps: 1. Choose Your Pin Layout: o Select either the 2-pin or 3-pin layout for the "Amiga Modulator Mount." o Both layouts will work for the adapters. o An "old" variant is available without the extra thin base. Optional: Use fine sandpaper or a heater to smooth the mount pins. Recommendation: The "Amiga Modulator Mount 3 pin" is personally recommended, but all options should work. 2. Mounting the Modulator Mount: o Attach the Amiga Modulator mount to your mainboard using tiny wood screws from below. o This should be the final time you need to unmount the mainboard from the case. Caution: Seek help from a specialist if needed. 3. Choose a Bracket Kit: o Select from various bracket kits depending on your specific needs. 4. Print the Top Lock: o Print the "Top Lock 2 pin" or "Top Lock 3 pin" based on your previous choice. 5. Assemble and Secure: o Assemble all parts and snap the top lock into place. Printing Tips: • Depending on the brackets, you might need to experiment with print directions, support, and/or raft. • For brackets like the MicroSD and MicroSD2x, printing them standing up and with a raft is recommended. Enjoy your improved setup with easy access and hot-swappable connectors for your Amiga 1200!
Statistics
Likes
0
Downloads
0