LTN156AT02 LCD cover + T.SK 105A.03
Description
Ok, so I wanted to make a monitor from LTN15AT02 LCD 1366x768 panel. However I could not find whole proper model to build one, so I took several projects on CC license and slightly modified them. Here are my results - maybe somebody needs similar thing. I took front LCD frame from https://www.thingiverse.com/thing:4150915 I made then a back frame with same dimensions with a hole where LVDS cable should be for this LCD panel. Frame and backplate were cut in parts to fit on a 30x30 printer (there is a slicer feature to do that so I post whole parts) I took LCD driver enclosure from https://www.thingiverse.com/thing:5182958/files and cut it because for me it was too big. I created a lid to it. I made simple speaker covers in Tinkercad. They're very small speakers took from some old failed laptop but they do work. I took the buttons panel, buttons and status LED/IR plate from https://www.thingiverse.com/thing:4114120 ; the latter was slightly modified with bottom wall added. Finally I screwed a VESA 100x100 stand that I found on Thingiverse https://www.thingiverse.com/thing:5182958/files - totally unmodified. Added all things used as source as a **credit with all respect to the authors**; adding unmodified models for convenience for single download. All parts together and LCD panel make a monitor that can be used for testing thin clients or other stuff :)
Statistics
Likes
0
Downloads
0