Meta Quest 3 Gunstock
Description
# Meta Quest 3 VR Gunstock ## Overview The Meta Quest 3 VR Gunstock is designed specifically for the Quest 3, providing good tracking stability and precision for your FPS VR gaming experience. It is compatible with __fabric__ battery cover knuckle strap replacements (Not tested with AMVR straps). ## Required Components - **PTFE Tubing (2mm ID, 4mm OD)** - **M4 Screws (10-14mm length, 1x)** - **M3 Screws (6-10mm length, 4x)** - **Aluminum Tubing (8mm outer diameter, 2 pieces)**: - Recommended lengths: 250mm and 350mm. ## Printing and assembly Instructions - Print the __latch.stl__ with __0.1mm__ layer height. Everything else should work with 0.2mm layers. - Print the __tpu_grip_insert.stl__ using soft TPU filament, or find somewhere 1mm thick rubbery material and glue it in __left-controller-grip.stl__. - (__important__) Insert two pieces of PTFE tubing into the __latch.stl__ to prevent scratches. - Put everything together and align in VR, then drill holes in the aluminum tubes at the attachment points using a 2.5mm drill bit. - Screw everything together using M3 screws. - Enjoy :)
Statistics
Likes
0
Downloads
0