Planetary Geared Extruder
Description
This Is A Variant Of Nylocke'S And Glacian22 Ezflex Extruder. It Is A Direct Replacement For Seemecnc'S Ezstruder. Designed For Use With 1.75Mm Filament And A Nema 17 Planetary Geared Motor. Like Glacian22 Extruder, It Can Handle Flexible Filaments Very Well. Nylocke'S Design: Http://Www.Youmagine.Com/Designs/Ezflexstruder Glacian22'S Design: Http://Www.Thingiverse.Com/Thing:744759 I'M Not Good At Explaining The Assembly In English, So I Hope The Pictures Can Show It Clearly. Bom: - (X9) M3X10Mm Bolt - (X4) M3 Nut - (X1) M4X30Mm Flat Head Bolt [Arm To Body. It Needs To Be A Flat Head Bolt, So That The Bearing Can Rotate Freely] - (X3) M4 Nut (Or Nylon Lock Nuts) - (X1) M4X50Mm Bolt [Body To Mounting Spacer To Mounting Bracket] - (X1) M4X40Mm Bolt [Body To Mounting Spacer To Mounting Bracket] - (X2) 684Zz Bearing (9Mm Od, 4Mm Id, 4Mm Thick) - (X1) 625Zz Bearing (16Mm Od, 5Mm Id, 5Mm Thick) - (X1) Ezstruder Spring [Don'T Know The Specs] - (X1) Passthrough Push Fit Connector - (X1) Nema 17 Planetary Geared Stepper Motor (Recommended Ratio Of 5:1) - (X1) M7 Hobbed Gear For 8Mm Shaft - 7Cm Aprox Of Ptfe Tubing (2Mm Id X 4Mm Od) Printed Parts: - Body - Planetary Adapter - Arm - Bearing Holder (You Will Only Need One. There Are 4 With Different Diameter So You Can Choose The Perfect Fit) - Spring Tensioner - Optional: Mounting Spacer (For Using M4 Bolts Instead Of The 6-32 From Seemecnc. You Will Need To Drill Bigger Holes To The Ezstruder Mounting Bracket)
Statistics
Likes
42
Downloads
0