Aerotech Initiator 29mm
Description
Model rocket based on the Aerotech Initiator 29mm Length 934mm Diameter 66mm All pieces should be close to friction fit, if your printer is dialed in. Sanding or modification will likely be required as I wanted this to be a tight fit Replaceable engine mounts: 1. Engine block in place for Estes model F15-4 engine. Print the engine mount separately, insert an 29mm engine of your choice into the mount and slide the whole unit into the rocket body. If the engine mount deforms from the heat you can just print a new one instead of printing a whole new body. 2. Additional engine mount with no motor block so you can fit larger engines. Be sure to add appropriate engine block Any 29mm Motor should work. If you build or fly this model let me know how it goes. I am always looking for feedback.
Statistics
Likes
0
Downloads
0