Advanced Darkroom F-stop Timer
Description
This is an improved, stylish and more convenient enclosure for the project https://github.com/lo1ol/DarkroomTimer. For this case you will need to purchase separately: • 3 pcs. Low profile flat switch GATERON 2.0 or similar of the same height. With or without a click - choose to your taste (https://aliexpress.ru/item/1005005783406100.html) • 4 pcs. M3 bolts 2cm long • 4 pcs. M3 nuts • 35.5x90x3mm piece of translucent black acrylic glass You will also need 3 bolts for attaching the toggles, 4 bolts for attaching the LCD and at least 1 bolt for attaching the Arduino. I can’t tell you their sizes because I picked them from what I had at home and forgot to measure them. All texts and graphics are silk-screened on the body and buttons, a file with them is attached to the project All parts are designed for printing using PLA plastic with a 0.2mm nozzle and a layer thickness of 0.14mm for greater accuracy when assembling with electronic components. I printed all the parts on a Bambulab P1S printer using PLA+ plastic from eSUN
Statistics
Likes
1
Downloads
1