creakity k1 lid riser, compatible with orbiter v2
Description
k1 lid riser thats compatible with orbiter v2. the adaptor i used for the orbiter:https://www.printables.com/model/623172-creality-k1max-orbiter-20-adapter extra chain links because you will need a few: https://www.thingiverse.com/thing:6195775 you will need m3 screws and m3 heat inserted threads, and its optional but i recomend to get a long steel spring rod and run it through the chain, i used 1,2mm you need to use a riser on the front, ( i made one for you), the rear riser is solved with hh, you need to mount the chain on it, so the chain wont catch on the edge of the printer. assembly: hb v2 is the left edge hh is the rear edge hj is the right edge hn is the front edge sbe v2 is the front left corner sbh v2 is the rear left corner sje v3 is the front right corner sjh is the rear right corner it should look like the cad model on picture. you should glue/melt together the pieces on the left side for a better seal, ( look out the tolerances are not that wide )
Statistics
Likes
0
Downloads
0