Radahn HueForge
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Orange Transmission Distance: 7.5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #14 (1.2mm) swap to Orange for the rest.
Statistics
Likes
0
Downloads
0