Rotating USB Drive / Flash / SD Card Desktop Storage
Description
This is a rotating desktop flash storage holder. It has a rotary hub design with a base that the top part rotates on. This is done with a 8mm x 22mm x 7mm bearing (608ZZ) in the base, and 2cm of 8mm (M8) threaded rod in the top part for the axle. Use a bit of teflon tape on the threaded rod if its not spinning smoothly. This holds 16 usb sticks (8 large, 8 smaller), 8 SD cards, 20 micro-SD Print using regular/default settings for PLA and it should print fine with no supports. ADDITIONAL ITEMS NEEDED: 1x 8mm x 22mm x 7mm bearing (608ZZ) 1x 8mm (M8) threaded rod (at least 2 cm)
Statistics
Likes
0
Downloads
5