IKEA OXBERG Knob With Flange - 2mm and 3mm hole for screw
Description
I needed a replacement knob for my IKEA OXBERG doors on BILLY bookshelves that I'm using for filament storage, because I added magnets to the doors to keep the cats out and they were so strong the doors were hard to open with the stock knobs. I added a wider cylinder to the bottom of the [original knob](https://www.thingiverse.com/thing:4239526) by [beakirby](https://www.thingiverse.com/beakirby/designs) so that I can more easily grip the knob to open the doors. I also found that the 2mm hole on the original was just a bit too small to work with the screws I used (they came with the doors, not sure if they may have used smaller screws in the past?). So I also added a version with a 3mm hole for the screw. ### Single Color If you just want to print in a single color, use one of these files: * IKEA-Oxberg-Knob-With-Flange-2mm-Hole.stl * IKEA-Oxberg-Knob-With-Flange-3mm-Hole.stl ### Multicolor! I have also uploaded separate .stl files for the flange/base and the cylinder, if you'd like to print them with different colors. * IKEA-Oxberg-Knob-Part1-Cylinder-2mm-Hole.stl if you have thinner screws, OR * IKEA-Oxberg-Knob-Part1-Cylinder-3mm-Hole.stl if you have larger screws One of the above, AND * IKEA-Oxberg-Knob-Part2-Flange.stl You can either print them separately and glue together (I recommend [Gloop!](https://www.3dgloop.com/) - it's super strong bond, and bonds in seconds), or if you want to switch colors during the print (either manually by pausing after the flange, or using AMS or multiple toolheads, etc.) you can use the separate files, EITHER the 3mm or 2mm "Part 1" (only one cylinder) and the Flange. Drag two files (choose one Part1 and then Part2) together into your slicer (hopefully this works with most slicers) and choose "Yes" to import as a single file with multiple parts. Then you can select each part and assign a color. The "I probably don't need to say this" disclaimer: DO NOT IMPORT BOTH 2MM AND 3MM WITH THE FLANGE AS A SINGLE OBJECT - YOU ONLY NEED ONE CYLINDER. :)
Statistics
Likes
0
Downloads
0