All Purpose Hose/Cable Hanger/Hook Remix
Description
This is a remix of the original hose hanger from escmidt12 found here: https://www.thingiverse.com/thing:4734886 Made it more economical While retaining the original strength. Widened the hanger a bit to hold more hose. While the OP suggests PETG, you can use PLA just fine with this. I suggest printing it in .28 draft mode with 5 external perimeters, 7 top and bottom layers and an 18% gyroid infill. I used a brim and oriented the print properly on the bed to use no supports when printing.
Statistics
Likes
0
Downloads
0