House Lannister HueForge
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200.5x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA Paramount 3D Iron Red Transmission Distance: 3 PLA Protopasta Good as Gold Transmission Distance: 5 This print uses 2 unique filaments Swap Instructions: Start with Iron Red At layer #15 (1.28mm) swap to Good as Gold for the rest.
Statistics
Likes
0
Downloads
0