Kawasaki Versys-x 300 Windshield spacers 25mm
Description
I designed a simple mod for the stock Kawasaki versys x300 windshield. This mod has significantly lessened the buffeting on my motorcycle helmet, though it still isn't perfect. I am 6'2" and I wear a Bell MX9. The spacers are 25mm long (about 1"). You will need some hardware: 4 - Stainless 40xM6 bolts 4 - Stainless 5/16 metal washers 8 - 5/16x3/4x1/16 rubber washers You can use regular non stainless bolts, but they will rust over time. I have also added a simlpe, yet terrible drawing for installation. I also used lock tight on the bolts, just to be safe. All parts were printed with PETG. Use at your own risk.
Statistics
Likes
0
Downloads
0