Hard case for the SparkGap Labs MCT-73
Description
This is a case to protect the SparkGap Labs MCT-73. https://sparkgaplabs.com/index.php You can print one as shown or modify the f3d file in Fusion 360 to suit your needs. I used 1mm single sided EVA foam to make everything snug and prevent rattles. I used PETG for the latches so they had a little flex and PLA for the case. 6x M3 x 30mm Bolts are needed for the hinge and latch. Credit to the creator of the Parametric Rugged Box that this case was modified from. https://www.printables.com/model/258431-rugged-box-parametric Big thanks to Brian from SparkGap labs for making such an enjoyable kit! FAQ: • I do not sell prints. Your best bet is download the files and find a local printing company in your area. • I can not customize this for you, Fusion 360 is available free for Hobby use and only needs a few hours of learning to get you enough knowledge to customize this design. • You can not sell this design, the original author of the case does not grant commercial rights nor do I. If I see this case in your ebay or Etsy store etc I will report your store for creative commons violation.
Statistics
Likes
0
Downloads
0