Small Pet Harness Kit
Description
Photos TBD. I have a new Puppy. He needs some kind of restraint, and I feel like a collar is not good for his neck. The green webbing you see in the photos is on sale at Amazon, and the D-ring is cheap at Hobby Lobby. I found several buckle models here on Thingiverse, and I used them to create this model of a 3-way buckle with slip-lock buckles. The models here include: - the assembly model, which you should not attempt to print. - The main receiver model, which you should print vertically as the model is oriented. The additional skirt is in the model to add adhesion to avoid it pulling off your plate while printing in this orientation. The point here is to put the layer lines around the body of the main receiver for the sake if strength. - The Female Connectors are models together in one file so they can be printed together. Left and Right are indicated by the ">>>" and "<<<" on the top face. - The friction buckle should be printed in this orientation with slicer supports added as there is a plate-facing surface not flat against the print plate. You will need two of them. Photos will include pictures of how to thread the webbing. You should cut the webbing based in the size of your pet.
Statistics
Likes
0
Downloads
0