SpaceX iPhone 12 Pro Case
Description
I designed this to fit my iPhone 12 Pro. I don't know if the dimensions for the 12 Pro and iPhone 12's are the same, so I don't know if it will fit a regular 12 or 12 Pro Max. If you try on something other than a 12 Pro, please leave a comment to let me know how it worked. Dimensions (from digital calipers) of my 12 Pro I used when designing to help you decide if it fits another iPhone: Length=146.8 mm Width= 71.6 mm Depth=7.9 mm Camera Hole= 33.6 mmx31.1 mm If you want the symbol to be a different color, then change at 17.5 mm By the way, the point on the end of the X is pretty sharp. I couldn't angle it so it wasn't so sharp in the design, so I just use my nippers and cut it off at 30 degrees or so. Now it doesn't catch on my pocket or fingers. I upgraded my Ender 3 Pro with a direct drive extruder so I could print TPU. However, I did try printing this with PLA, and it seems to work. One corner did pull up from the bed, so it didn't fit perfectly, but I think it might still work. If you try PLA, please leave a comment to let me know how it worked.
Statistics
Likes
0
Downloads
0