King Sword
Description
This is a sord designed for a giant influential King. This sword design in only for Display purposes, this i did not design to be able to swing around. I Like giant swords that are not too detailed but not simple just a good, elegant balance between the two. The story of the blade is that a tall King was kind but strong to make a great sword like this to defeat the dragons of the land. The tradition of the Kingdom is whoever is strong enough to pick up the large heavy sword and be able to swing and cut through at least half of a tree they will be appointed by the king to become the next king by the old king after he has passed on or is unable to defend the Kingdom. I would recommend putting together A and B parts before assembling to make the sword longer. I will recommend in order to not spend too much filament on the sword make it an infill 10% and have at least 10 walls thick, this will allow you to sand it down smooth and also allow the pins to be able to be glued into the slots. you will need to print 2 Pin#1, 14 Pin#2, 17 Key#1, and 1 Key#1. there are many parts and depending on how your printer can print the pins and keys will fit pretty smoothly. I hope you enjoy the giant design it was fun to make, i will love to hear the about how the print went. P.S. this is my second design i made from the bottom up from the sketches to the actual 3d object.
Statistics
Likes
0
Downloads
0