SpeedyBee F405 Wing Mini Case
Description
Connectors XT60 should be those that has the gray snap-on sleeve/protector. As it has a flange around, which prevents pulling the connectors out from the case. 14AWG Wire is used in this case. The power wires are totally free of strain, therefore, absolutely minimal chance to rip off solder pads during crash. The CUSTOM BOARD configuration is used (reffering to the F405 manual) The board is mounted from the bottom by 4pcs extra M2x6 screws that goes to the standoffs. Original screws are too short for this! The Top cover mounts GPS BN-220, which is optional. 4pcs of M3x10 screws were used.
Statistics
Likes
0
Downloads
0