Cable Clip with closure (Print-in-Place)
Description
Cable Clip with closure (Print-in-Place) This is a simple cable clip with closure to prevent slipping out of the clip. The model is Print-in-Place design. Just move the closure a bit sideways to ‘’crack'' it - it has a pretty tight fit. I uploaded three versions of the clip (width): 15mm 20mm 25mm The clip is printed in PLA. If you want more flexibility for the clip, just print it in PETG. I tested both materials - PLA is good enough. Check this model on my MakerWorld profile: https://makerworld.com/en/@Abbizz Give it a try and don't be afraid of suggestions for improvement. Thanks!
Statistics
Likes
0
Downloads
2