ADKS - Ender 3 Pro/St Rear Case v3
Description
Hi All, Here is my design for a Ender 3 Pro/St rear case Additional information: Center positioned, with more internal room for better cable management. Side cable ducts. The motherboard is rotated 90 degrees to improve the SD/USB accessibility. 40x20 Fan installed vertically, without screws (airflow from the inside to the outside of the case). The case can also be installed on the front of the printer turning it into a front case. No supports are needed (please check out the slicing software pictures attached). The pictures show the case for the Ender 3 Pro version (wider Y-axis). For the Ender 3 Standard version, please check out the files with the final "S" in the name. Compatible with the Ender 3 stock motherboard and with other models with the same form factor (for example SKR mini e3). The case was designed to slide easily. If you want more grip, please add some tape on the side rails. Please note that Z and Y End Stop connection cables must be swapped to install the case in the rear position A bunch of M3x8 screws is required. The concept: The idea is to create an additional case mirrored on the front of the printer as well, to accommodate all the other electronics such as Raspberry Pi, buck converters, switches, and more that you may want to install. Please edit and share as you like, and don’t forget to donate me a tip :D (see below). Thanks A few more words: I really love designing and 3D printing, and I am incredibly happy to see how some of my projects are particularly popular online. My designs will never be for sale, however, if you appreciate my design, please consider supporting me with a tip. Thank you! Paypal.me link: https://paypal.me/adarkstudio Cheers Nio (Adarkstudio)
Statistics
Likes
0
Downloads
0