Nitro Disk Launcher
Description
Frame: Model frame should be printed on its back (as shown in slicer photo), no supports required. For best results print with 0.4mm nozzle at 0.2 resolution. Trigger and Launcher: Print with PETG at max wall-line count for optimal strenght. Disk: Print disk with 0.3mm or 0.2mm nozzle. Spring Version (coming soon): Requires 30mmX4mmX5mm extension spring and M2*12 screw. Please post your makes, and feel free to leave suggestions! Thanks, Enjoy!!!
Statistics
Likes
0
Downloads
0