Moon clip holder rack belt 8 round
Description
This is a moon clip belt rack that holds 8-round 38/357/9 clips with magnetic retention. Tested with TK clips for the TRR8. Might be compatible with other S&W N Frame 8 round moon clips for the 929, 627, and 327. Might also work with the GP100. The individual mount is printable upright without supports. I've found it to be pretty strong in PLA with 30% infill. It would be stronger printed sideways, but would need support. For retention it takes a 18x3 mm magnet with countersunk hole, [like this](https://www.amazon.com/gp/product/B096B7JBQ3). I used a short #4 countersunk sheet metal screw to hold the magnet in place, but a magnet without a hole could also be glued. There are two versions of the mount: straight and curved. For the four-clip belt rack I made, I used two straights at the ends, and curved in the middle. A four-clip mounting strip design is included. This would be best to print in TPU with 100% infill. Four clips was the biggest strip design I could fit in my printer. Multiple strips could be chained or you could use a segment of heavy belt material or hard rubber. Mounting holes are spaced for compatibility with typical "Lok" belt clips and clones. Holes are sized for M4 nuts and button head bolts. If somebody wants a different hole sizes or locations, send me dimensions and a gift for my time. I'll get on it right away.
Statistics
Likes
0
Downloads
0